Product Description
Detailed Photos
Installation Instructions
1. Do not remove the rubber plug before installing the compressor to prevent dirt and moisture from entering.
2. The compressor must not be tilted or inverted when stored, transported or installed, while avoiding impact.
3. When the compressor is working, it is inclined by no more than 5° from the horizontal state.
4. The compressor is filled with the best amount of special refrigeration oil approved by Dongbei, and should not be poured or added at will.
5. In order to ensure the system pressure balance, the compressor running time must not be less than 4 minutes.
6. The compressor cannot withstand high pressure or start and run under vacuum conditions. The system cannot be
vacuumed with a compressor.
7. The design of the refrigeration system should fully consider the oil return of the system.
8. The operating temperature of the compressor should not be higher than 43 °C. At maximum room temperature (43 ° C),
continuous operation, condensing pressure and maximum peak pressure should not exceed the following values.
9. The compressor should be stored in a dry place.
Technical drawings